- Home
- Configurations

Standard configurations
All ICARUS blue R-Series products are delivered according to the respective hardware specifications (see data sheets). However, there are various pre-configurations available on the software side. And no matter which of the four standard configurations you choose – You can always change/edit all of the settings listed below using the smartphone app:
- Assign several outputs to one button (app) / function key (transmitter)
- Change the behaviour of buttons / function keys (act as a switch, time functions, …)
- Prevent simultaneous operation of buttons / function keys (interlock)
- Deactivate buttons / function keys
- Change button icons
- Protect settings from unauthorized access (password protection)
Please note: Inputs can only be used in individual configurations (see below).
Configuration "S1"
Operation of 8 functions
Hardware:
R820 or R420 in combination with TM600 and/or ICARUS blue R-Series app
Description:
A total of 8 different functions can be controlled. In the smartphone app this is done via 8 buttons. On the TM600 you can switch between the function blocks (FB) 1 and 2 using the two upper selection buttons. The function keys A to D control the functions 1 – 4 (FB 1) or 5 – 8 (FB 2).
Configuration "S2"
Operation of 6 functions
Hardware:
R820 or R420 in combination with TM600 and/or ICARUS blue R-Series app
Description:
A total of 6 different functions can be controlled. In the smartphone app this is done via 6 buttons. On the TM600 the function keys A to D are used to control functions 1 – 4 and the two upper selection keys are used to control functions 5 and 6.
Configuration "S3"
Operation of 4 functions
Hardware:
R820 or R420 in combination with TM600 and/or ICARUS blue R-Series app
Description:
A total of 4 different functions can be controlled. In the smartphone app this is done via 4 buttons. On the TM600 the function keys A to D are used to control functions 1 – 4. The two upper selection keys of the TM600 remain functionless.
Configuration "2XR"
Switching between two receivers
Hardware:
TM600 in combination with two R420 or two R820
Description:
Switch between two receivers using the two upper selection buttons on the TM600. The function keys A – D are used to control functions 1 – 4 of the respective / selected receiver.
Individual configurations
The possibilities of the different standard configurations do not fit your application?
We would be happy to create a configuration perfectly tailored to your application. For this purpose, numerous other functions / features are available to you, such as:
- Linking input signals with functions
- Disable control via app or handheld transmitter
- Disable the configuration options for the user
- BrandID (enable control only with devices purchased from you)
- Change the functions of the TM600 selection keys
- Adjust colors and functions of the (selection) LEDs